Mark Roberts Motion Control (MRMC)
Last updated
Was this helpful?
Last updated
Was this helpful?
Camera Tracking is supported via Free D protocol with MRMC Robots through Flair.
Supported MRMC Robots; Bolt X, Bolt, Bolt Jr+
Flair sends tracking data out at 50Hz. If your productions frame-rate is not 50fps (24, 23.98, 25, 29.97, 30, 48, 59.94 or 60fps) you will need to interpolate the data before Live FX receives the data. If you do not interpolate the tracking data to your productions frame-rate, the tracking will jitter. Contact MRMC the best interpolation settings, as each robot is different. Additionally, we recommend using the MRMC Flair Virtual Production Synch Box to simply the workflow.
Flair Setup
Once Flair is open, navigate to:
Setups / External Devices
External Devices Setup
Set Data Output to Free D, UDP and set a Static IP address. Set the Port Number to 4000. Click apply and Save.
In Live FX, navigate to the Live Links menu.
Activate Free D.
Select the correct network interface. Set your port to 4000.
Click apply.
Your tracking is now applied and will be visible in the Live Links menu.
